The O3 Pure Eco Wash Laundry System will forever change the way you do one of the most common household chores. The O3 Pure Eco System uses the natural cleaning powers of O3 or Ozone to both clean and disinfect your laundry more effectively and safely than any soap or detergent. This technology has been used for years in commercial applications, hotels and hospitals across the U.S. These residential units are also widely used throughout Europe and our O3 Pure Eco units are both CE and RoHS compliant.
Ozone laundry units have been around for decades, but were too large, expensive or unreliable for household use. Just in the last few years, advances in this technology have brought them into residential applications. Our current model widely used within the European Union, is now designed to work within any American household, with washers of any make and model. Cold water is first directed through the O3 Pure Eco Wash Laundry System. An on board ozone generator converts O2 (regular oxygen) into O3 (ozone) which is mixed and diffused into the water supply for your washer. This ozonated water then passes into the washer. The colder the water, the more effective the ozone saturation. The ozone cleans by breaking the molecular bonds that hold dirt and grime to your cloths while oxidizing most of this material into carbon dioxide and water. It also interacts with microorganisms such as bacteria by rupturing and breaking their cell walls. Ozone works about 3000 times faster and 1.5 times for effectively than bleach against bacteria. Afterward any remaining ozone naturally converts back into regular oxygen. What you are left with are clean cloths and linens free of any smells, dirt and grime or chemicals. Simple to use and extremely effective. The O3 Pure Eco Wash doesn't require any maintenance, cleaning or additives and it is backed by a 30 Day Money Back Guarantee and a Full 1 Year Manufacturer Parts and Labor Warranty.
These laundry units are straight forward in both design and functionality and installation is a snap. Upon receiving one of our units, you simply place the included mounting template on the wall near your washer. Once the locations for the two screw holes are marked, you can install 2 screws with a phillips screwdriver, again all of which are supplied. After the unit is mounted, turn off your cold water supply for your washer, disconnect it from the washer and attach it to the O3 Pure Laundry unit. We also include an additional hose which runs from the unit to the washer. After it is set up and the water is turned back on, just plug in the 12V adapter to your nearest outlet and your ready to start using your system. The unit will automatically turn itself off and on by sensing when water is being used by the washer. Total installation time is about 10 minutes.